Click on the image to check the artwork
By certification 
TP101 Thermal Printing Mechanism (Compatible APS MP105)
This is the main characteristic of the TP101. Thermal printing mechanism is definitely, reliability, the quality and long lasting performance. It is the suitable product for industrial environments such as weight, control, safety systems, as well as medical and portable applications.
Features
◆Easy loading system
◆Compact design
◆Very light
◆High speed
◆Wide voltage range
◆High Resolution(8dots/mm)
◆Long life(50km or 100millions pulse)
◆Low noise
Specifications
Printing method: Thermal dot printing
Number of dots:192 dots/line
Resolution: 8dots/mm/(203dpi)
Valid Printing width: 24 mm
Paper width（mm）: 38
Paper feed pitch: 0.125mm
Dimension(mm): 48.1 x 32x 14.6
Weight（g）: 30g
Head temperature: By NTC thermistor
Paper end sensor: By photo interrupter
For printer head（V）: 4.2～7.2
For logic（V）: 2.7～7
Operating temperature（℃）: 0～50（no condensation）
Operating humidity（RH）: 20％～85％（no condensation）
Storage temperature (℃): -25～70（no condensation）
Storage humidity（RH）10％～90％（no condensation）
Thermal head specifications
Number of Heat Elements: 192 dots/line
Dot density: 0.125mm
Dot size: 0.11mm x 0.10mm
Valid printing width: 24mm
Average Resistance Value: 123Ω±10%
Operating voltage: 4.2～9.5V
Pulse life: 100 million pulse
Mechanical life: >50km
Life test conditions: 25 ° C, the heating time ratio is not more than 12.5%.
Life test judgment standard: The rate of change of the resistance value of each heating point after the test is completed is less than or equal to 15% with respect to the resistance value of each heating point before the test, that is, it is judged as qualified.
Thermal head specifications
Outlines
Item |
Specification |
Number of Heat Elements |
192 dots/line |
Dot density |
0.125mm |
Dot size |
0.11mm x 0.10mm |
Valid printing width |
24mm |
Average Resistance Value |
123Ω±10% |
Operating voltage |
4.2～9.5V |
Pulse life |
108 pulse |
Mechanical life |
50km |
Life test conditions: 25 ° C, the heating time ratio is not more than 12.5%.
Life test judgment standard: The rate of change of the resistance value of each heating point after the test is completed is less than or equal to 15% with respect to the resistance value of each heating point before the test, that is, it is judged as qualified.
FPC pin specifications
PIN No. |
SIGNAL |
Function |
|
1 |
Co |
Collector of photo-transistor |
|
2 |
L-GND |
Gnd for logic |
|
3 |
VF |
Anode of photo-sensor |
|
4 |
VH |
Dotline voltage |
|
5 |
VH |
Dotline voltage |
|
6 |
DI |
Data input |
|
7 |
P-GND |
Gnd for dotline |
|
8 |
P-GND |
Gnd for dotline |
|
9 |
P-GND |
Gnd for dotline |
|
10 |
P-GND |
Gnd for dotline |
|
11 |
TM |
Thermistor first terminal (second in Gnd) |
|
12 |
STB3 |
Third strobe |
|
13 |
STB2 |
Second strobe |
|
14 |
STB1 |
First strobe |
|
15 |
VDD |
Logic voltage |
|
16 |
CLK |
Serial clock |
|
17 |
/LAT |
Latch |
|
18 |
VH |
Dot line voltage |
|
19 |
PA |
First phase of stepper motor |
|
20 |
PB |
Second phase of stepper motor |
|
21 |
/PA |
Third phase of stepper motor |
|
22 |
/PB |
Fourth phase of stepper motor |
|
APPLICATIONS
EFT POS
Fiscal printers
Hand held terminals
Taxi meters
http://www.oposprinter.com/
